For use in the total drive line when the manufacturer specifies a GL-4 or GL-5 lubricant. This superior quality automotive gear oil has performance capabilities that allows it to have optimal performances in a very wide range of applications.
|MAN 341 type Z2 (ZF)
|MAN 342 type S1
|Scania STO 1:0
|ZF TE-ML 05A, 12L, 12N, 16F, 17B, 19C, 21A (ZF001283)
|API: GL-4, GL-5, MT-1
|Arvin Meritor Axles 0-76-N
|MAN 341 type E3 (Eaton)
|MAN 342 type M3
Features & Benefits
Optimum protection against wear and tear, also under high stress working conditions.
Advanced additives protect against corrosion, oxidation, foaming, and deposits.
Premium synthetic base oils, balanced additive system avoid breakdowns even with extended drains.
Consistent, stable viscosity
Excellent viscosity-temperature properties even at very low temperatures. Highly stable viscosity with long-term multigrade advantages.
Extra long drain intervals
Approved according to MAN 342 S1 for a 500.000km drain interval.
Fuel economy properties
Less friction by using synthetic base oils contributes to better fuel economy. Increased oil circulation provides excellent cooling properties resulting in further fuel savings.
For use in the total drive line when a GL-4 or GL-5 is specified by the manufacturer. Recommended for conventional as well as ultra modern gearboxes and transmissions of commercial vehicles.
- ZF Gearboxes
- Eaton Axles
- Transfer boxes
Not suitable for limited slip applications.
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline specifications, variations in these characteristics may occur.
Health & Safety
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet http://msds.valvoline.com
Protect the environment
Take used oil to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil or water.
We recommend to store all packages under cover. In case outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should never be stored above 60°C, exposed to hot sun or freezing conditions.
|Valvoline Heavy Duty TDL Pro
|SAE Viscosity Grade
|Viscosity, mm2/s @ 100 ºC. ASTM D-445
|Viscosity, mm2/s @ 100 ºC. After shearing (CEC: L-45-T-93).
|Viscosity, mm2/s @ 40 ºC. ASTM D-445
|Viscosity Index ASTM D-2270
|Viscosity, mPa.s –40°C. ASTM D-529
|TAN, mg KOH/g ASTM D-664
|TBN, mg KOH/g ASTM D-2896
|Pour Point, ºC ASTM D-5950
|Specific Gravity @ 15.6°C. ASTM D-4052
|Flash Point, COC, ºC. ASTM D-92