ProFleet Engine Oil SAE 10W-40, an Ultra High Performance Diesel (UHPD) engine oil, is recommended and approved by major truck manufacturers for long-drain intervals according to their specifications for long-distance driving.
An ultra-modern additive system provides protection and a clean engine over the entire oil drain period. The unique formulation prevents deposit formation and protects against soot build-up.
|MAN M 3277
|Scania LDF-3, LDF-2, Euro 6
|ACEA E4, E7
Suitable for Euro I, II, III, IV, and V engines with Exhaust Gas Recirculation (EGR) and Selective Catalytic Reduction (SCR) systems exhaust after treatment systems; not suitable for Diesel Particle Filters (DPF) (except Scania Euro 6).
Suitable for heavy-duty engines in trucks and buses.
Also meets the manufacturers’ extended-drain requirements
Features and Benefits
Strong oil film protects the engine against wear and corrosion.
Premium additives keep the engine clean over extended drain periods. The unique formulation prevents deposit formation and protects against soot build-up
OEM approved motor oil
Recommended and approved by major engine manufacturers.
Fulfills the requirements of the EU Euro I/II/III/IV/V emission standards, and Scania Euro 6.
Extended service intervals and long-drain oil refreshment periods.
Easy starts even under very cold conditions.
Health and Safety
This product is not likely to present any significant health or safety hazards when used correctly in the right application. A Safety Data Sheet (SDS) is available on request via your local sales office or via the internet @ http://msds.ashland.com
Protect the Environment
Take used oil to an authorized collection point. Do not discharge into drains, soil or water.
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline™ specifications, variations in these characteristics may occur.
|ProFleet Engine Oil
| SAE Viscosity Grade
|Viscosity, mm2/s @ 100 ºC. ASTM D-445
|Viscosity, mm2/s @ 40 ºC. ASTM D-445
|Viscosity Index ASTM D-2270
|Viscosity, mPa.s –25ºC. ASTM D-5293
|TBN, mg KOH/g ASTM D-2896
|Pour Point, ºC ASTM D-5950
|Specific Gravity @ 15.6°C. ASTM D-4052
|Flash Point, COC, ºC. ASTM D-92