Valvoline Moly Fortified MP grease Universal, lithium EP grease with molybdenum disulphide to reduce friction. Developed for lubrication of automotive and industrial equipment specially when working under wet circumstances.
Can be used for chassis lubrication of trucks, tractors, bulldozers and other on- and off the road and industrial equipment. The product is mechanically very stable and, due to its smooth structure, easily pumpable.
|NLGI grade: 2
|SKF Emcor test: pass DIN 51802
|Water wash-out (%) at 80ºC. pass ASTM D-1264
|Copper corr. Test: pass ASTM D-4048
Suitable for marine applications like; deck machine, winches, gearboxes etc.
Suitable for earth moving equipment like; bulldozers and draglines, caterpillar-sprockets, open gears, sliding surfaces, chains & cables etc., especially when working in damp or wet conditions.
Agricultural and forestry machinery working in damp or watery conditions.
Industrial applications, sliding surfaces.
Steel ropes and cables of machinery and lifts.
Features and Benefits
The product lubricates and protects under the most severe circumstances like damp and wet conditions. In the presence of water a good lubricating film will be maintained.
Moly Fortified MP grease protects against rust and corrosion and is resistant against oxidation. The grease has a good mechanical stability so that it will not be pressed away.
Multi purpose applications
Moly Fortified MP grease was developed for those companies that require a product for lubrication of diverse mechanical equipment, where the use of a moly grease is desired. Especially wet contracting companies will prosper by using this product. This product should not be used for fast running bearings.
Severe working conditions
Moly Fortified MP grease can even be used in unfavorable working conditions like canal building or swamp lumbering or on-surface mining.
Health and Safety
This product is not likely to present any significant health or safety hazards when used correctly in the right application. A Material and Safety Data Sheet (MSDS) is available on request via your local sales office or via the internet @ http://msds.ashland.com
Protect the Environment
Take used oil and grease to an authorized collection point. Do not discharge into drains, soil or water.
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline™ specifications, variations in these characteristics may occur.
|Moly Fortified MP grease
|Worked penetration, 25ºC. ASTM D-217
|Oil Viscosity, mm2/s @ 40ºC. ASTM D-445
|Oil Viscosity, mm2/s @100ºC. ASTM D-445
|Dropping Point ºC. ASTM D-566
|Application temperature ºC
||-15 to +120
|Specific Gravity @ 15.6°C.