Valvoline Heavy Duty Gear Oil Pro 75W-80 LD provides outstanding protection and lubrication of the gearbox over a wide temperature range.
|MAN 341 Z-4
|ZF TE-ML 01L, 02L, 16K (ZF001830)
|MAN 341 E-3
|Renault* (in accordance with Renault note technique B0032/2 Annex 3
|ZF TE-ML 08, 13
*Check owner’s manual before use
Features & Benefits
Optimum protection against wear and tear, also under high stress working conditions.
protect against corrosion, oxidation, foaming, and deposits. Suitable for use with ZF-Intarders.
Consistent, stable viscosity
Excellent viscosity-temperature properties even at very low temperatures. Highly stable viscosity with long-term multigrade advantages.
Fuel economy properties
Smoother lubrication contributes to better fuel economy. Increased oil circulation provides excellent cooling properties resulting in further fuel savings.
Extended oil drain interval
Suitable for extended oil drain intervals.
Suitable for hand shifted gearboxes and transaxles of trucks and buses where the manufacturer recommends a GL-4 transmission oil with a viscosity of SAE 75W-80.
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline specifications, variations in these characteristics may occur.
Health & Safety
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet http://msds.valvoline.com
Protect the environment
Take used oil to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil or water.
We recommend to store all packages under cover. In case outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should never be stored above 60°C, exposed to hot sun or freezing conditions.
|Valvoline Heavy Duty Gear Oil Pro LD
|SAE Viscosity Grade
|Viscosity, mm2/s @ 100 ºC. ASTM D-445
|Viscosity, mm2/s @ 100 ºC. After shearing (CEC: L-45-T-93)
|Viscosity, mm2/s @ 40 ºC. ASTM D-445
|Viscosity Index ASTM D-2270
|Viscosity, mPa.s –40°C. ASTM D-5293
|Pour Point, ºC ASTM D-5950
|Specific Gravity @ 15.6°C. ASTM D-4052
|Flash Point, COC, ºC. ASTM D-92