Valvoline Heavy Duty Axle Oil 85W-140 provides increased protection and lubrication of the differential and the transaxle over a wide temperature range.
|ZF TE-ML 07A, 08
Features and Benefits
Increased protection against wear and tear, also under high stress working conditions.
Modern additives protect against corrosion, oxidation, foaming and deposits.
Quality base oils and a highly balanced additive system avoid breakdowns even after long-time use.
Consistent, stable viscosity
Increased viscosity-temperature properties even at very low temperatures. Highly stable viscosity with long-term multigrade advantages. Robust oil film.
Suitable for differentials and transaxles of 4WD, vans, trucks and buses where the manufacturer recommends GL-5 transmission oil with a viscosity of SAE 85W-140.
The viscosity SAE 85W-140 is also used in agricultural and earthmoving equipment.
Not for limited slip applications.
Health and Safety
This product is not likely to present any significant health or safety hazards when used correctly in the right application. A Safety Data Sheet (SDS) is available on request via your local sales office or via the internet @ http://msds.ashland.com
Protect the Environment
Take used oil to an authorized collection point. Do not discharge into drains, soil or water.
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline specifications, variations in these characteristics may occur.
|Valvoline Heavy Duty Axle Oil
|SAE Viscosity Grade
|Viscosity, mm2/s @ 100 ºC. ASTM D-445
|Viscosity, mm2/s @ 40 ºC. ASTM D-445
|Viscosity Index ASTM D-2270
|Viscosity, mPa.s –12°C. ASTM D-5293
|Pour Point, ºC ASTM D-5950
|Specific Gravity @ 15.6°C. ASTM D-4052
|Flash Point, COC, ºC. ASTM D-92