Valvoline All-Fleet Extreme LE engine oil is a Super High Performance Diesel (SHPD) engine oil for use in heavy-duty, turbo-charged industrial and truck engines.
This oil is specially engineered based on synthetic technology to meet the medium extended drain requirements of the world’s leading truck manufacturers and contains a special additive system providing effective piston cleanliness and wear control.
The product can be used in Euro engines with or without Diesel Particle Filter (DPF) and for most engines with Exhaust Gas Recirculation (EGR) and Selective Catalytic Reduction (SCR) after treatment systems. Suitable for Euro 1,2,3,4,5,6* engines. *Euro 6 oil recommendations differ per truck brand. Check owner’s manual before use.
|Deutz DQC III-10 LA
|MTU Type 2.1
|Mack EO-O Premium Plus
|API: CJ-4 / SN
|MAN M 3575
|Scania Low Ash
Features & Benefits
Suitable for heavy-duty engines in trucks, buses and industrial vehicles. Suitable for medium extended drain oil refreshment periods
Super High Performance Diesel engine oil.
Fulfills the requirements of EU Euro 5 and 6 emission standards.
Mid SAP Oil suitable for SCR, EGR and DPF exhaust systems.
Maximizes engine durability.
Clean engine and wear protection
Special additive system provides effective piston cleanliness and wear control.
Recommended by many major heavy-duty engine manufacturers
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline specifications, variations in these characteristics may occur.
Health & Safety
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet http://msds.valvoline.com
Protect the environment
Take used oil to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil or water.
We recommend to store all packages under cover. In case outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should never be stored above 60°C, exposed to hot sun or freezing conditions.
|All-Fleet Extreme LE Engine Oil
|SAE Viscosity Grade
|Viscosity, mm2/s @ 100 ºC. ASTM D-445
|Viscosity, mm2/s @ 40 ºC. ASTM D-445
|Viscosity Index ASTM D-2270
|Viscosity, mPa.s –25°C. ASTM D-5293
|TBN, mg KOH/g ASTM D-2896
|Pour Point, ºC ASTM D-5949
|Specific Gravity @ 15.6°C. ASTM D-4052
|Flash Point, COC, ºC. ASTM D-92