Valvoline All-Fleet Extreme LE engine oil is suitable for heavy duty engines in trucks, buses and industrial vehicles. It is suitable for medium extended drain oil refreshment period.
The product can be used in Euro engines with or without Diesel Particle Filter (DPF) and for most engines with Exhaust Gas Recirculation (EGR) and Selective Catalytic Reduction (SCR) after treatment systems.
Suitable for Euro 1,2,3,4,5,6* engines. *Euro 6 oil recommendations differ per truck brand. Check owner’s manual before use.
|MAN M 3575*
|Mack EO-O Premium Plus
|Caterpillar ECF-3, ECF-2, ECF-1-a
|Cummins CES 20081
|Deutz DQC III-10LA
|MTU Type 2.1
Features & Benefits
Ultimate protection and performance
All-Fleet heavy duty engine oil is formulated with high quality base oils and modern additive technologies to ensure ultimate protection and performance under all operating conditions in mixed fleet truck, bus and/or off-road applications.
Carefully selected detergency additives have demonstrated to minimize deposits and help to keep the engine clean.
Low emission compatible
Designed to be compatible with the latest low emission standards and aftertreatment systems such as DPF (Diesel Particulate Filter). Low ash engine oil helps to keep the aftertreatment system clean and in optimal condition.
The combination of high quality base oil and modern additive technology has resulted in excellent wear protection in varying operating conditions.
Health & Safety
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained. Reference is made to the Safety Data Sheet (SDS) which is available on request via your local sales office or via the internet http://msds.valvoline.com
Protect the environment
Take used oil to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil or water.
We recommend to store all packages under cover. In case outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should never be stored above 60°C, exposed to hot sun or freezing conditions.
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline specifications, variations in these characteristics may occur.
|All-Fleet Extreme LE
|SAE Viscosity Grade
|Viscosity, mm2/s @ 100 ºC. ASTM D-44
|Viscosity, mm2/s @ 40 ºC. ASTM D-445
|Viscosity Index ASTM D-2270
|Viscosity, mPa.s –25°C. ASTM D-5293
|TBN, mg KOH/g ASTM D-289
|Pour Point, ºC ASTM D-5949
|Specific Gravity @ 15.6°C. ASTM D-4052
|Flash Point, COC, ºC. ASTM D-92