All Fleet Extreme SAE 10W-40 is a Super High Performance Diesel (SHPD) engine oil for use in heavy-duty turbo-diesel engines of trucks, buses and industrial engines.
The oil is engineered with synthetic technology to meet the long-life requirements of major engine manufacturers and gives protection over a long time period.
All-Fleet Extreme SAE 10W-40 fulfils the API CI-4 specification, which means that the oil can be used in engines with Exhaust Gas Recirculation (EGR) systems. The ACEA E7 specification shows that the oil is suitable for modern heavy duty engines, fitted with Selective Catalytic Reduction (SCR) systems for NOx reduction.
The oil is not intended for Diesel Particle Filter (DPF) after treatment systems. All-Fleet Extreme SAE 10W-40 is made with synthetic technology resulting in improved low temperature properties.
|ACEA E7, E5, E2
|API CI-4, CH-4, CG-4
|MAN M 3275
|Cummins CES 20076/77/78
|Mack EO-N, EO-M Plus
|MTU Type 2
|Caterpillar ECF-2, ECF-1-a
|Deutz DQC III-10
Suitable for heavy-duty mixed fleets.
Suitable for EGR and SCR after treatment systems -- not for DPF systems.
Suitable for extended oil drain intervals in heavy duty trucks, buses and off-road machinery.
Suitable for low temperatures.
Features and Benefits
Recommend for trucks fulfilling the EU Euro emission requirements up to Euro 4 and 5 standards * (*please consult owner’s manual before use)
Recommended and approved by many major heavyduty engine manufacturers.
Superior performing additive system prevents soot and sludge formation, ring sticking and deposit buildup.
Enhanced oxidation control at high temperatures and extended drain intervals
Made with highly effective dispersant technology for superior wear protection and engine cleanliness, resulting in maximized engine durability
Low temperature performance
Enhanced cold flow properties, meeting the stringent OEM and ACEA 2012 specifications
Health and Safety
This product is not likely to present any significant health or safety hazards when used correctly in the right application. A Safety Data Sheet (SDS) is available on request via your local sales office or via the internet @ http://msds.ashland.com
Protect the Environment
Take used oil to an authorized collection point. Do not discharge into drains, soil or water.
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline™ specifications, variations in these characteristics may occur.
|SAE Viscosity Grade
|Viscosity, mm2/s @ 100 ºC. ASTM D-445
|Viscosity, mm2/s @ 40 ºC. ASTM D-445
|Viscosity Index ASTM D-2270
|Viscosity, mPa.s –25ºC. ASTM D-5293
|TBN, mg KOH/g ASTM D-2896
|Pour Point, ºC ASTM D-5950
|Specific Gravity @ 15.6°C. ASTM D-4052
|Flash Point, COC, ºC. ASTM D-92