All-Fleet Extra engine oil SAE 15W-40
All-Fleet Extra engine oil is a Super High Performance Diesel (SHPD) Premium conventional engine oil for use in heavy-duty, turbo-charged industrial and truck engines. This oil is specially engineered to meet the long drain requirements of the world’s leading truck manufacturers. It contains a special additive system to keep the engine clean, prevent ring sticking and wear, and maintain maximum output longer.
|ACEA E7, E5, E3
|API CI-4, CH-4, CG-4
|Cummins CES 20076/77/78
|Deutz DQC III-10
|MTU Type 2
|Mack EO-N, EO-M Plus
|Caterpillar ECF-2, ECF-1-a
Suitable for heavy-duty engines in trucks and buses and for marine and industrial applications. Suitable for Selective Catalytic Reduction (SCR) and Exhaust Gas Recirculation (EGR) systems -- not for Diesel Particulate Filter (DPF) after treatment systems.
Recommended and approved by many major OEMs
Features and Benefits
Fulfills the requirements of the EU Euro emission standards for truck engines.
Recommended and approved by many major heavyduty engine manufacturers.
Suitable for middle long-drain oil refreshment periods.
Enhanced oxidation control at high temperatures and extended drain intervals
Made with highly effective dispersant technology for superior wear protection and engine cleanliness resulting in maximized engine durability.
Superior performing additive system prevents soot and sludge formation, ring sticking and deposit buildup.
Low Temperature Performance
Enhanced cold flow properties, meeting latest stringent OEM and ACEA 2012 specifications
Health and Safety
This product is not likely to present any significant health or safety hazards when used correctly in the right application. A Safety Data Sheet (SDS) is available on request via your local sales office or via the internet @ http://msds.ashland.com
Protect the Environment
Take used oil to an authorized collection point. Do not discharge into drains, soil or water.
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline specifications, variations in these characteristics may occur.
|SAE Viscosity Grade
|Viscosity, mm2/s @ 100 ºC. ASTM D-445
|Viscosity, mm2/s @ 40 ºC. ASTM D-445
|Viscosity Index ASTM D-2270
|TViscosity, mPa.s –20ºC. ASTM D-5293
|TBN, mg KOH/g ASTM D-2896
|Pour Point, ºC ASTM D-5950
|Specific Gravity @ 15.6°C. ASTM D-4052
|Flash Point, COC, ºC. ASTM D-92