Shell Gadus S2 V220AD Greases are high performance grease for the lubrication of bearings subjected to harsh
They are based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener and contains
extreme-pressure, anti-oxidation, anti-wear, anti-corrosion and adhesion additives. It also contains solids to
provide resistance to shock loading.
Performance, Features & Benefits
- Good oxidation and mechanical stability
Resists the formation of deposits caused by oxidation at high operating temperatures and maintains consistency, reducing leakage.
- Good corrosion resistance
Provides protection from the elements of corrosion.
- For shock loaded conditions
Resists breakdown, softening and subsequent leakage under shock loads.
Reduces losses and grease consumption.
- Extreme pressure performance
Rig tests confirm EP additives in Shell Gadus S2 V220AD Greases prolong bearing life when subjected to heavy and shock loads.
Shell Gadus S2 V220AD Greases are recommended for the lubrication of shock loaded heavy duty bearings working in damp hostile conditions. They are well-suited for use in off-highway applications and also for the lubrication of fifth wheels.
Typical Physical Characteristics
||Shell Gadus S2 V220AD 2
|Kinematic Viscosity @400C cSt
||IP 71 / ASTM D445
|Kinematic Viscosity @1000C cSt
||IP 71 / ASTM D445
|Cone Penetration, Worked @250C 0.1mm
||IP 50 / ASTM D217
|Dropping Point 0C
|4 Ball Weld Load Kg typical
|4 Ball Weld Load Kg minimum
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur.
Health, Safety & Environment
Health and Safety
Shell Gadus S2 V220AD Grease is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Operating Temperature Range
Operating Temperature Range -250C to +1200C, peak 1300C